Description
SilencerCo Omega 36M Details
The SilencerCo Omega 36M is a fullauto rated, modular centerfire suppressor built to run across rifles, pistols, and subguns. It ships in two length configurations — a short 4.9" / 9.8 oz setup for compact, lightweight builds and a long 6.85" / 12.5 oz setup for maximum suppression. The suppressor is 1.57" in diameter and is constructed from 174 stainless steel, titanium, Inconel, and Cobalt 6. Compatible calibers span from 5.7x28 and 9mm on pistols up to .338 Lapua Magnum on rifles, making this one of the most versatile suppressors SilencerCo builds.
Features and Benefits
- Two modular length configurations: short (4.9" / 9.8 oz) and long (6.85" / 12.5 oz), swapped without tools using the included Charlie tool set
- Caliber compatibility: pistol calibers from 5.7x28 through 9mm; rifle calibers from 5.56 NATO up through .338 Lapua Magnum, including 300 BLK, .308 WIN, 6.5 Creedmoor, and .300 Win Mag
- 1.57" diameter and compact profile keep the suppressor compatible with standard iron sights on most host platforms
- Fullauto rated; built for sustained fire without accelerated wear
- Charlie pattern mounting system supports four attachment options: ASR quickattach, direct thread, piston (for pistols and 300 BLK subsonic), and 3Lug (for pistol calibers and subsonic 300 BLK at close range)
- Charlie front caps are interchangeable for caliberspecific bore optimization; flash hider front caps also available separately
- Constructed from 174 stainless steel, titanium, Inconel, and Cobalt 6 for erosion resistance and longterm durability
- Limited Lifetime Warranty backed by SilencerCo; warranty extends to the original registered purchaser
Minimum Barrel Length Requirements
- .223 Remington / 5.56 NATO: 10" minimum
- .308 Winchester / 7.62mm NATO: 16" minimum
- .300 Winchester Magnum: 18" minimum
- .338 Lapua Magnum: 18" minimum
SilencerCo Omega 36M Specifications
SilencerCo builds to exacting standards. Here&##39;s exactly what you&##39;re getting.
- Caliber: 5.7x28 to 9mm (pistol); 5.56 NATO to .338 Lapua Magnum (rifle)
- Configuration: Two lengths — short and long
- Length: 4.9" (short) / 6.85" (long)
- Weight: 9.8 oz (short) / 12.5 oz (long)
- Diameter: 1.57"
- Materials: 174 stainless steel, titanium, Inconel, Cobalt 6
- Mounting Systems: ASR, direct thread, piston, 3Lug (Charlie pattern)
- FullAuto Rated: Yes
- Warranty: Limited Lifetime Warranty (original registered purchaser)
Mounting System Overview
The Omega 36M uses SilencerCo&##39;s Charlie mounting platform. The ASR (Active Spring Retention) mount provides fast, secure quickattach/detach via a secondary locking collar and is compatible with any ASR muzzle device. Direct thread mounts work with all common barrel thread patterns. Piston mounts enable use on pistols and are also compatible with 300 BLK subsonic — note that the piston mount should not be used on highpowered rifle calibers due to heat and pressure. The 3Lug mount is a pushandtwist option for pistol calibers and subsonic 300 BLK at close range.
For help navigating the suppressor buying process from purchase to transfer, see our guide on how to buy a suppressor.
What&##39;s in the Box
- SilencerCo Omega 36M suppressor
- Charlie ASR Mount
- Charlie .36 cal flat front cap (toolless, 9mm / .36 cal)
- Charlie Basic Tool
- Charlie Multitool
- Field Manual
Maintenance Notes
The Omega 36M requires minimal internal maintenance — SilencerCo describes the internal volume as functionally similar to a car muffler, meaning internal baffle cleaning is not necessary. Mounts and mounting surfaces should be cleaned periodically with standard gun cleaning solvent to remove carbon buildup. When using the piston mount, the ORing (Viton size018, available separately) should be replaced when it shows wear, and should be lubricated regularly with white lithium grease. Do not run cleaning patches through the bore.
